Products Specification:
Dimension: 50.8x*x*mm, with a slot Wide 3mmx depth *mm in the middle of magnets.
Grade: C8
Pulling force: Magnetic Strength: 1.5lbs
This is a typical type of ferrite magnets, which is produced by grinding process. General magnet production process can’t produce some special magnets, so that grinding process is needed. Grinding process mainly uses the grinder and diamond wheel to process the ferrite magnet. First we will use coarse grinding wheel to rapidly kibble, and make the magnets basically meet the dimension and shape required in the technical drawing, but there will also be small margin left, at this time a layer of damage will appear on the surface of magnets. Then we can wipe off the damage by fine grinding.But the bottom shelf of this magnet protrudes out a part, which make the magnets difficult to produce by using grinding process. So we stick the bottom shelf with finished magnet together with glue, instead of producing the whole magnet by grinding process. This will not affect the performance of products, as long as the magnets don’t get fierce collision.
Tags: ferrite magnets, C8 magnets
Dimension: 50.8x*x*mm, with a slot Wide 3mmx depth *mm in the middle of magnets.
Pulling force: Magnetic Strength: 1.5lbs
This is a typical type of ferrite magnets, which is produced by grinding process. General magnet production process can’t produce some special magnets, so that grinding process is needed. Grinding process mainly uses the grinder and diamond wheel to process the ferrite magnet. First we will use coarse grinding wheel to rapidly kibble, and make the magnets basically meet the dimension and shape required in the technical drawing, but there will also be small margin left, at this time a layer of damage will appear on the surface of magnets. Then we can wipe off the damage by fine grinding.But the bottom shelf of this magnet protrudes out a part, which make the magnets difficult to produce by using grinding process. So we stick the bottom shelf with finished magnet together with glue, instead of producing the whole magnet by grinding process. This will not affect the performance of products, as long as the magnets don’t get fierce collision.
Tags: ferrite magnets, C8 magnets
